FPOS Fire Resistant Glass

The second generation of FPOS fire resistant glass is a new type of hard inorganic transparent fireproof glass imported from Europe by FPOS in Europe. This type of glass has the advantages of high strength, large adhesion, high transparency, good stability, strong weather resistance and good fire resistance. It is a high-quality heat-insulating fireproof glass that is sustainable, stable and green. The core of the high-quality FPOS fire-retardant rubber, can be combined with a variety of forms and glass bonding into a variety of products with fire performance and strength.


Fireproof principle:

When a fire occurs, the float glass of the fire surface will burst quickly after the high temperature, and the fireproof glass inter-layer will begin to foam and expand (the foam expansion ratio is up to 10 times), and absorb the high heat brought by the flame combustion to form an opaque fireproof. This opaque fireproof, which has strong hardness, can effectively isolate the spread of flame, smoke and toxic gas, and absorb the heat brought by flame combustion to cool down.


Product number:

The FPOS fire resistant glass has thicknesses of 10, 15, 21, 25, 35, 41, 55, 65, 75, 103mm; the fire protection category includes fireproof, fireproof and heat radiation, fireproof and heat insulation; the fireproof and heat insulation time is EW60, 120 minutes. , EI30, 60, 90, 120, 180, 240 minutes. The products have passed the tests of national standard GB15763.1-2009, British standard BS476 PART22 and European standard BS EN 1364-1:1999, BS EN1634-1:2008, Australian standard AS 1530.4-2005.


Product use:

The FPOS fire resistant glass is a kind of high quality fireproof glass. It can be used to replace imported high quality fireproof glass and replace composite fireproof glass, grout fireproof glass, single piece fireproof glass. Also, it can be made into outer curtain wall, fireproof glass for exterior doors and windows and other areas of function or demand, such as: fireproof floor, floor, zenith, firewall, bulletproof fireproof, anti-theft, etc.

 

Advantages and Characteristics of FPOS fire resistant glass

01 FRIEPROOF

Meet the fire safety design requirements of 1h, 2h, 3h, 4h fire integrity or fire Insulation

02  More stable

 It is a truly sustainable and stable fireproof glass with a warranty of 5 years and a service life of more than 10 years. It can not be air bubbles, does not yellow, does not change color, and does not degumming;

03  GREEN

The FPOS fire resistant glass rubber uses imported food grade raw materials: harmless, non-toxic, green and environmentally friendly;

04 UITRATHIN

10mm FPOS fire resistant glass can meet 135min fireproof and heat radiation, which creates the world’s best-performing and thinnest fire resistant glass.

05 INSULATION

It is a class EI type of fire resistant glass, which can make the fire site from more than 1000℃ down to below 140℃. It has passed the British Standard、European Standard、Australian Standard and other standard tests.

06 HARD

Its fireproof glue is a kind of hard and inorganic crystal silicon fireproofglue. The surface glass can be tempered and can be produced large area of fire resistant glass to meet the special requirements of designers.


The second generation of FPOS fire resistant glass is a new type of hard inorganic transparent fireproof glass imported from Europe by FPOS in Europe. This type of glass has the advantages of high strength, large adhesion, high transparency, good stability, strong weather resistance and good fire resistance. It is a high-quality heat-insulating fireproof glass that is sustainable, stable and green. The core of the high-quality FPOS fire-retardant rubber, can be combined with a variety of forms and glass bonding into a variety of products with fire performance and strength.


Fireproof principle:

When a fire occurs, the float glass of the fire surface will burst quickly after the high temperature, and the fireproof glass inter-layer will begin to foam and expand (the foam expansion ratio is up to 10 times), and absorb the high heat brought by the flame combustion to form an opaque fireproof. This opaque fireproof, which has strong hardness, can effectively isolate the spread of flame, smoke and toxic gas, and absorb the heat brought by flame combustion to cool down.


Product number:

The FPOS fire resistant glass has thicknesses of 10, 15, 21, 25, 35, 41, 55, 65, 75, 103mm; the fire protection category includes fireproof, fireproof and heat radiation, fireproof and heat insulation; the fireproof and heat insulation time is EW60, 120 minutes. , EI30, 60, 90, 120, 180, 240 minutes. The products have passed the tests of national standard GB15763.1-2009, British standard BS476 PART22 and European standard BS EN 1364-1:1999, BS EN1634-1:2008, Australian standard AS 1530.4-2005.


A key to call A key navigation